 Lipstick Umbrella Box #951 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=951&type=Umbrella+Box [View]
|
  |
|
|
The Umbrella Box: The lipstick is a luxurious and elegant looking umbrella case inspired by the lipsticks. It is quite an untraditional design for an umbrella box. The box is air-tight meaning you can store wet umbrellas after the rain in your bag without any problem..
How to Produce: Injection molded in two parts with a rubber band in between to make it truly air-tight..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Rubber.
Dimensions and Packaging: The enclosing box for a single Lipstick Umbrella Box is 300 mm x 60 mm x 60 mm, each box contains a single Lipstick Umbrella Box and the bounding box dimensions for the package is 350 mm x 110 mm x 110 mm, roughly 8316 pieces fit into 20' standard container and 16786 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-28 14:51:41.
|
|
Typeface Box Umbrella Box #950 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=950&type=Umbrella+Box [View]
|
|
|
|
The Umbrella Box: This is rather a cost-effective solution for an umbrella box with typeface or images as decoration, it is pretty straight-forward design. It is made in 100% recycled paper..
How to Produce: Recycled paper cut, fold and wrapped..
Possible Materials: The designer noted the following materials could be used in production: Paper.
Dimensions and Packaging: The enclosing box for a single Typeface Box Umbrella Box is 60 mm x 295 mm x 60 mm, each box contains a single Typeface Box Umbrella Box and the bounding box dimensions for the package is 110 mm x 345 mm x 110 mm, roughly 8316 pieces fit into 20' standard container and 16786 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-28 14:45:29.
|
|
Anti-Rain Umbrella Box #949 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=949&type=Umbrella+Box [View]
|
|
|
|
The Umbrella Box: The Anti-Rain packaging for umbrella was inspired by the canned foods, especially for emergency situations. An ordinary umbrella becomes a gift item!.
How to Produce: Produced by the traditional can making methods..
Possible Materials: The designer noted the following materials could be used in production: Metal.
Dimensions and Packaging: The enclosing box for a single Anti-Rain Umbrella Box is 105 mm x 250 mm x 105 mm, each box contains a single Anti-Rain Umbrella Box and the bounding box dimensions for the package is 155 mm x 300 mm x 155 mm, roughly 4560 pieces fit into 20' standard container and 9360 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-28 13:01:54.
|
|
Rainshield Umbrella Box #948 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=948&type=Umbrella+Box [View]
|
|
|
|
The Umbrella Box: Inspired by Tennis-ball packaging this is an umbrella box that is quite functional; after the rain you can store the wet umbrella inside and because the package is air-tight you can easily throw it back to your bag. Somehow makes an ordinary umbrella into a gift object..
How to Produce: Injection or blow molded plastic with chrome finishing. Rubber or silicone cap. Size will change according to the size of umbrella inside..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Polyethylene Terephthalate (PET), Rubber.
Dimensions and Packaging: The enclosing box for a single Rainshield Umbrella Box is 250 mm x 65 mm x 65 mm, each box contains a single Rainshield Umbrella Box and the bounding box dimensions for the package is 300 mm x 115 mm x 115 mm, roughly 8568 pieces fit into 20' standard container and 17640 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-28 11:34:21.
|
|
Mangoelixir Cosmetics Container #947 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=947&type=Cosmetics+Container [View]
Product Family: Mango |
|
|
|
The Cosmetics Container: Inspired by the elixir bottles of ancient times and also lab. equipments, this is the last of my mango series cosmetic bottles, could be used as a shampoo bottle, body lotion bottle or other cosmetics. A Glass version could be used for sauces etc. as well..
How to Produce: Preform pet is blow molded to the form and painted..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Polyethylene Terephthalate (PET).
Dimensions and Packaging: The enclosing box for a single Mangoelixir Cosmetics Container is 111 mm x 200 mm x 111 mm, each box contains a single Mangoelixir Cosmetics Container and the bounding box dimensions for the package is 161 mm x 250 mm x 161 mm, roughly 5550 pieces fit into 20' standard container and 11250 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-26 09:43:22.
|
|
Mangoman Cosmetics Container #946 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=946&type=Cosmetics+Container [View]
|
|
|
|
The Cosmetics Container: Mangoman is inspired by the mango fruit and also the Traditional Chinese and Korean ceramic vases, the form is quite organic and appears to be a vase as well as a cosmetic container..
How to Produce: Produced by blow molding of the pre-form plastics, and it is painted after the initial processing..
Possible Materials: The designer noted the following materials could be used in production: Plaster, Polyethylene Terephthalate (PET).
Dimensions and Packaging: The enclosing box for a single Mangoman Cosmetics Container is 115 mm x 160 mm x 116 mm, each box contains a single Mangoman Cosmetics Container and the bounding box dimensions for the package is 165 mm x 210 mm x 166 mm, roughly 5544 pieces fit into 20' standard container and 12045 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-26 09:23:07.
|
|
Mangovase Cosmetics Container #945 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=945&type=Cosmetics+Container [View]
Product Family: Mango |
|
|
|
The Cosmetics Container: Mangovase is a cosmetic container with aquatic inspiration. It was designed to contain especially shampoos or body lotions in a great quantity..
How to Produce: Plastic blow molding with post-production finishing..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Polyethylene Terephthalate (PET).
Dimensions and Packaging: The enclosing box for a single Mangovase Cosmetics Container is 108 mm x 200 mm x 111 mm, each box contains a single Mangovase Cosmetics Container and the bounding box dimensions for the package is 158 mm x 250 mm x 161 mm, roughly 5550 pieces fit into 20' standard container and 11400 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-26 08:58:56.
|
|
Mangocan Cosmetics Container #944 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=944&type=Cosmetics+Container [View]
Product Family: Mango |
|
|
|
The Cosmetics Container: Mangocan was inspired by Mangos, Aubergine and Onions, it is indeed an elegant design with a very organic shape that attracts potential customers..
How to Produce: Plastic blow molding with post-production coloring..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Polyethylene Terephthalate (PET).
Dimensions and Packaging: The enclosing box for a single Mangocan Cosmetics Container is 98 mm x 200 mm x 108 mm, each box contains a single Mangocan Cosmetics Container and the bounding box dimensions for the package is 148 mm x 250 mm x 158 mm, roughly 6000 pieces fit into 20' standard container and 12160 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-26 09:08:39.
|
|
Mangocuk Cosmetics Container #943 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=943&type=Cosmetics+Container [View]
Product Family: Mango |
|
|
|
The Cosmetics Container: Mangocuk is a cosmetics bottle with an unorthodox shape. It was inspired by both the mango fruit and eggplants! It is really easy to handle and use thanks to its organic design..
How to Produce: Produced by blow molding of plastics, post-coloring after realization..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Polyethylene Terephthalate (PET).
Dimensions and Packaging: The enclosing box for a single Mangocuk Cosmetics Container is 163 mm x 150 mm x 137 mm, each box contains a single Mangocuk Cosmetics Container and the bounding box dimensions for the package is 213 mm x 200 mm x 187 mm, roughly 4368 pieces fit into 20' standard container and 8892 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-26 09:09:00.
|
|
Mangorino Cosmetics Container #942 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=942&type=Cosmetics+Container [View]
Product Family: Mango |
|
|
|
The Cosmetics Container: Mangorino is another variation of our tasty and sugary looking cosmetics bottles with inspiration derived from mango and other exotic fruits, it is perfect for liquid soap, body lotions and hair conditioners..
How to Produce: Produced by blow molding of plastics, post-coloring..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Polyethylene Terephthalate (PET).
Dimensions and Packaging: The enclosing box for a single Mangorino Cosmetics Container is 138 mm x 130 mm x 138 mm, each box contains a single Mangorino Cosmetics Container and the bounding box dimensions for the package is 188 mm x 180 mm x 188 mm, roughly 5577 pieces fit into 20' standard container and 11323 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-26 07:47:10.
|
|
Mangovaisius Cosmetics Container #941 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=941&type=Cosmetics+Container [View]
Product Family: Mango |
|
|
|
The Cosmetics Container: An avocado mango mixture! The Mangovaisius is a delicious cosmetics packaging that could be used for shampoos, hair conditioners and hand lotions and body creams. A glass version could be done for some kind of sweet creamy sauce..
How to Produce: Realized in PET Blow molding, post-finishing for coloring..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Polyethylene Terephthalate (PET).
Dimensions and Packaging: The enclosing box for a single Mangovaisius Cosmetics Container is 107 mm x 200 mm x 107 mm, each box contains a single Mangovaisius Cosmetics Container and the bounding box dimensions for the package is 157 mm x 250 mm x 157 mm, roughly 5700 pieces fit into 20' standard container and 11550 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-06-10 17:16:36.
|
|
Mangbuble Cosmetics Container #940 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=940&type=Cosmetics+Container [View]
Product Family: Mango |
|
|
|
The Cosmetics Container: Inspired by the mango fruit, the design feels very natural and organic, the colors were chosen to provide difference and attraction. It could be used as a shampoo bottle, beauty cream or hair conditioner bottle..
How to Produce: Blow molding of PET, post-processing for coloring..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Polyethylene Terephthalate (PET).
Dimensions and Packaging: The enclosing box for a single Mangbuble Cosmetics Container is 117 mm x 156 mm x 117 mm, each box contains a single Mangbuble Cosmetics Container and the bounding box dimensions for the package is 167 mm x 206 mm x 167 mm, roughly 5880 pieces fit into 20' standard container and 12096 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-26 09:07:46.
|
|
Bas Stool #939 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=939&type=Stool [View]
|
|
|
|
The Stool: Inspired by ancient sculptures that have lost their heads and also the famous Michelangelo's David sculpture, Onur Mustak Cobanli of OMC Design Studios designed the Nuova Testa del David Stool as an iconic piece of furniture that works both as a sculpture and a stool. The stool is made of high temperature ceramics and can bear weights of around 120kg. This new interpretation of stool forms a bridge between traditional crafts and industrial production and the object also carries an ambiguous message with its sharp yet smoothed polygonal face. Designer Onur Müştak Çobanlı noted that he aimed to design an object that could initiate a talk, an object that can create an emotional bond with its users and surprise any spectators. This is the final version of my head series stool, a further inspiration indeed came from the saying "Basimin Ustunde Yerin Var" which literally translates to "You have space on my head" but actually means "You are the boss" or "We are at your disposal". The stool is comfortable and easily carries 120kg of load..
How to Produce: The stool was designed for high-temperature industrial ceramics and has a multi-part mold. .
Possible Materials: The designer noted the following materials could be used in production: Ceramic.
Dimensions and Packaging: The enclosing box for a single Bas Stool is 322 mm x 427 mm x 439 mm, each box contains a single Bas Stool and the bounding box dimensions for the package is 372 mm x 477 mm x 489 mm, roughly 400 pieces fit into 20' standard container and 800 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-06-11 09:18:26.
|
|
|
| Up: The action shot of the production version of Bas Stool. Realized with/in Ceramic. |
|
|
| Up: The prototype of Bas Stool. 1/1 Scale. Realized with/in Plaster. |
|
Baloons Stool #938 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=938&type=Stool [View]
|
|
|
|
The Stool: Balloons is another fun furniture, it was intended to add some happyness into your world, imagine; it is a stool with the shape of a bunch of balloons!.
How to Produce: A metal skeleton is built for all baloons and they are connected & welded to each other to provide an internal structure, afterwards the skeleton is covered by polyurethane foam and coated by colored latex or silicone. Alternatively compact polyurethane in different colors could also be used to realize the design. Base and supports are high-quality steel..
Possible Materials: The designer noted the following materials could be used in production: Polyurethane Foam, Rubber, Metal.
Dimensions and Packaging: The enclosing box for a single Baloons Stool is 225 mm x 450 mm x 357 mm, each box contains a single Baloons Stool and the bounding box dimensions for the package is 275 mm x 500 mm x 407 mm, roughly 648 pieces fit into 20' standard container and 1350 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-24 05:46:10.
|
|
Totems Indoor Seating System #937 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=937&type=Indoor+Seating+System [View]
Product Family: Totems |
|
|
|
The Indoor Seating System: The totems is a seating system for five, they are very fun objects; stackable stools and buckets that could be used as a decoration. It is a happy design. Could be used both indoors and outdoors. Dimensions are given for the five stacked pair..
How to Produce: Realized in different colors in plastics by injection molding process..
Possible Materials: The designer noted the following materials could be used in production: Plastic.
Dimensions and Packaging: The enclosing box for a single Totems Indoor Seating System is 360 mm x 1315 mm x 360 mm, each box contains a single Totems Indoor Seating System and the bounding box dimensions for the package is 410 mm x 1365 mm x 410 mm, roughly 168 pieces fit into 20' standard container and 348 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-23 16:19:38.
|
|
Monkey Totem Stool #936 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=936&type=Stool [View]
Product Family: Totems |
|
|
|
The Stool: The idea came from American Totems while I was thinking some design ideas for children. Somehow I decided to give it a try and then I developed this fun objects especially for children, Monkey Totem is a stool that is also stackable 50%, and it is also a bucket so that children can store their stuff and toys. I have opted for single side graphics; however the backside could have an upside down graphic so that when it becomes a bucket the monkey looks good! The graphics could be removed for more "serious" environments..
How to Produce: Realized by injection molding of plastics..
Possible Materials: The designer noted the following materials could be used in production: Plastic.
Dimensions and Packaging: The enclosing box for a single Monkey Totem Stool is 360 mm x 427 mm x 360 mm, each box contains a single Monkey Totem Stool and the bounding box dimensions for the package is 410 mm x 477 mm x 410 mm, roughly 432 pieces fit into 20' standard container and 900 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-23 16:13:51.
|
|
Wealth Rubbish Bin #935 designed in 2010
Permanent Link : http://www.omcdesign.com/?design=935&type=Rubbish+Bin [View]
|
|
|
|
The Rubbish Bin: Every-year we are throwing tons of stuff; wealth into rubbish and from that Idea I created these rubbish-bins which have the ornamental shape of a nicely cut-diamond; it is wealth that we are throwing...
How to Produce: Injection molded bottom, injection molded top, and metal base; three parts are attached together. This object is stackable during transportation..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Metal.
Dimensions and Packaging: The enclosing box for a single Wealth Rubbish Bin is 649 mm x 1000 mm x 649 mm, each box contains a single Wealth Rubbish Bin and the bounding box dimensions for the package is 699 mm x 1050 mm x 699 mm, roughly 54 pieces fit into 20' standard container and 102 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-22 15:18:43.
|
|
Design by OMC² 
Furniture: 
