 Macoroni Arm Chair #708 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=708&type=Arm+Chair [View]
|
  |
|
|
The Arm Chair: The macaroni chair was inspired by Shiro Kuramata's Ko-Ko chair, I wanted to arrive something more metallic, as it reminds me of a childens park, I also introduced the arm supports as it makes the chair greatly more comfortable, so overall I have a happy chair which is also easy to realize..
How to Produce: Metal tubes are bended, solid wood is used as a seating however it could be changed to plastic for better outdoor performance..
Possible Materials: The designer noted the following materials could be used in production: Metal, Wood, Plastic.
Dimensions and Packaging: The enclosing box for a single Macoroni Arm Chair is 532 mm x 610 mm x 593 mm, each box contains a single Macoroni Arm Chair and the bounding box dimensions for the package is 582 mm x 660 mm x 643 mm, roughly 160 pieces fit into 20' standard container and 336 pieces fit into the larger 40' standard container..
|
|
Dragon Arm Chair #689 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=689&type=Arm+Chair [View]
|
|
|
|
The Arm Chair: Truly inspired by an orijinal Chinese Ming Rose Chair, the new resulting furniture is a club chair which could also be used for outdoors, features holes for getting the water out..
How to Produce: Realized by cast aluminum with shiny finish or rotomolding of plastics. Single pieces could also be realized from wood however the finishing will be different..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Metal, Wood.
Dimensions and Packaging: The enclosing box for a single Dragon Arm Chair is 500 mm x 667 mm x 500 mm, each box contains a single Dragon Arm Chair and the bounding box dimensions for the package is 550 mm x 717 mm x 550 mm, roughly 132 pieces fit into 20' standard container and 272 pieces fit into the larger 40' standard container..
|
|
Tubes Arm Chair #627 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=627&type=Arm+Chair [View]
Product Family: Iyiki |
|
|
|
The Arm Chair: I have been trying to develop a product family using the Iyiki bench as a basis of design, this is one of my initial designs that came out..
How to Produce: Tubes of metal are bended and finally connected to each other, rubber pieces are used to stop them from hitting each other, one fun thing is that the design could be multicolor or it could be as long as you would desire..
Possible Materials: The designer noted the following materials could be used in production: Metal, Rubber.
Dimensions and Packaging: The enclosing box for a single Tubes Arm Chair is 390 mm x 664 mm x 457 mm, each box contains a single Tubes Arm Chair and the bounding box dimensions for the package is 440 mm x 714 mm x 507 mm, roughly 200 pieces fit into 20' standard container and 425 pieces fit into the larger 40' standard container..
|
|
Knppe 2 Cariye Arm Chair #585 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=585&type=Arm+Chair [View]
Product Family: Knppe 2 |
|
|
|
The Arm Chair: This is a hybrid of love-seat and arm-chair, as it could actually be used for both of these purposes, designed to be the single-twin seater for the Knppe 2 family..
How to Produce: Metal or wooden skeleton, polyurethane foam and textiles, bend-tubular metal legs..
Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Textiles.
Dimensions and Packaging: The enclosing box for a single Knppe 2 Cariye Arm Chair is 1120 mm x 594 mm x 842 mm, each box contains a single Knppe 2 Cariye Arm Chair and the bounding box dimensions for the package is 1170 mm x 644 mm x 892 mm, roughly 60 pieces fit into 20' standard container and 120 pieces fit into the larger 40' standard container..
|
|
Fafner Arm Chair #522 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=522&type=Arm+Chair [View]
|
|
|
|
The Arm Chair: The fafner was inspired by the horseshoe chair from China, I especially made the back part wider as once my professor suggested me to not to put the one leg to back if I make a three legged chair, in this case I am trying to cover for it. .
How to Produce: Half of the chair is a tube bended - around 4-5 cm in Diameter, the seating is not flat, it is casted and it is actually a triangle prism rather than a plane. Parts are welded to eachother..
Possible Materials: The designer noted the following materials could be used in production: Metal.
Dimensions and Packaging: The enclosing box for a single Fafner Arm Chair is 997 mm x 800 mm x 663 mm, each box contains a single Fafner Arm Chair and the bounding box dimensions for the package is 1047 mm x 850 mm x 713 mm, roughly 54 pieces fit into 20' standard container and 102 pieces fit into the larger 40' standard container..
|
|
Tsoffa Bir Arm Chair #482 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=482&type=Arm+Chair [View]
Product Family: Soffa |
|
|
|
The Arm Chair: This is a nice and sleek armchair that was inspired by the 1970s futuristic furniture fashion, I wanted to carry the tradition to modern and I believe I succeeded with this series. Quite comfortable meanwhile does not take so much space..
How to Produce: Production in wood and leather, wood is lathed, solid cut I think artisan woodworking skill is needed, polyurethane foam is under the leather and also for the pillow..
Possible Materials: The designer noted the following materials could be used in production: Wood, Leather, Polyurethane Foam.
Dimensions and Packaging: The enclosing box for a single Tsoffa Bir Arm Chair is 920 mm x 818 mm x 920 mm, each box contains a single Tsoffa Bir Arm Chair and the bounding box dimensions for the package is 970 mm x 868 mm x 970 mm, roughly 36 pieces fit into 20' standard container and 72 pieces fit into the larger 40' standard container..
|
|
Tsofa Bir Arm Chair #472 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=472&type=Arm+Chair [View]
Product Family: Tsofa |
|
|
|
The Arm Chair: The armchair was designed to be family of Tsofa, a series of designs inspired by 1960s sci-fi furniture fashion..
How to Produce: Wooden structure coated by foam and skinned by textiles. Leather seating inside is polyurethane foam..
Possible Materials: The designer noted the following materials could be used in production: Wood, Polyurethane Foam, Leather.
Dimensions and Packaging: The enclosing box for a single Tsofa Bir Arm Chair is 1015 mm x 650 mm x 738 mm, each box contains a single Tsofa Bir Arm Chair and the bounding box dimensions for the package is 1065 mm x 700 mm x 788 mm, roughly 54 pieces fit into 20' standard container and 102 pieces fit into the larger 40' standard container..
|
|
Karbir Arm Chair #457 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=457&type=Arm+Chair [View]
Product Family: Kar |
|
|
|
The Arm Chair: The project Kar is about creating a product family of furniture that is industrially feasible and easy to produce but yet it does not look as if it is coming from a factory, rather it feels its coming from an atelier..
How to Produce: Metal plane is press-cut and folded, thats it. Afterwards automatic painting process, leather coating for the seat..
Possible Materials: The designer noted the following materials could be used in production: Metal, Leather, Polyurethane Foam.
Dimensions and Packaging: The enclosing box for a single Karbir Arm Chair is 994 mm x 850 mm x 758 mm, each box contains a single Karbir Arm Chair and the bounding box dimensions for the package is 1044 mm x 900 mm x 808 mm, roughly 54 pieces fit into 20' standard container and 108 pieces fit into the larger 40' standard container..
|
|
Birlestir Bir Arm Chair #449 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=449&type=Arm+Chair [View]
Product Family: Birlestir |
|
|
|
The Arm Chair: This is a single seater comfortable wide arm chair, this is the base module for the Birlestir System, many of them can be put together to provide great waiting or guest seating or could be used as club chair..
How to Produce: Metal press cut from solid sheet, leather skin or upholstered fabric, sponge or polyurethane foam. .
Possible Materials: The designer noted the following materials could be used in production: Metal, Leather, Polyurethane Foam.
Dimensions and Packaging: The enclosing box for a single Birlestir Bir Arm Chair is 1053 mm x 850 mm x 850 mm, each box contains a single Birlestir Bir Arm Chair and the bounding box dimensions for the package is 1103 mm x 900 mm x 900 mm, roughly 45 pieces fit into 20' standard container and 99 pieces fit into the larger 40' standard container..
|
|
Tennis Arm Chair #445 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=445&type=Arm+Chair [View]
|
|
|
|
The Arm Chair: Inspired by the shape of tennis ball, this arm chair has chrome shell outside and leather seating inside, my idea for the chair is futuristic, I want it to be light and I want it to be like transformers; two of them making a combo and also like the droids in starwars, I want them to follow you, of course wireless speakers or hologram units will be embedded. .
How to Produce: Production is relatively easy by molding, however the mold design is important here. It could also be realized from metal..
Possible Materials: The designer noted the following materials could be used in production: Carbonfiber, Fiberglass, Metal.
Dimensions and Packaging: The enclosing box for a single Tennis Arm Chair is 1250 mm x 1250 mm x 1250 mm, each box contains a single Tennis Arm Chair and the bounding box dimensions for the package is 1300 mm x 1300 mm x 1300 mm, roughly 20 pieces fit into 20' standard container and 36 pieces fit into the larger 40' standard container..
|
|
Spot Arm Chair #444 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=444&type=Arm+Chair [View]
|
|
|
|
The Arm Chair: Are you working like a bee, a busy bee? Are you a hive master, a master mind? Do you need a chair to underline your status as the master bee (or the queen bee!). Here is my gift to all humanity. The Hive Master chair makes sure to underline that you are a busy bee, this is a luxurious chair with a built-in wireless speaker system, leather cushion and soft waterproof textile. The design was inspired by bees, but it was also be inspired by spots and lines, like a target, to be on target, to match your targets, to be on the spot etc. I aim to add some craziness and happiness to the usually boring work environment. Lets not be slave of the work..
How to Produce: Body in carbonfiber, or fiberglass molded, leather cushion is coating polyurethane body fit cut sponge, a thin metal structure exists, leg is metal cast..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Metal, Wood.
Dimensions and Packaging: The enclosing box for a single Spot Arm Chair is 701 mm x 1091 mm x 965 mm, each box contains a single Spot Arm Chair and the bounding box dimensions for the package is 751 mm x 1141 mm x 1015 mm, roughly 36 pieces fit into 20' standard container and 72 pieces fit into the larger 40' standard container..
|
|
|
| Up: the prototype of Spot Arm Chair. 1/5 Scale. Realized with/in Rapid Prototyping / Stereolitography. |
|
Frame Arm Chair #443 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=443&type=Arm+Chair [View]
|
|
|
|
The Arm Chair: Framed is a bossy chair concept, the design started from a cube and slowly evolved into the Frame. I wanted to design a chair that could also be used as waiting chair, but with modernist feelings, the texture is beehive hexagon, and I think a version in crocodile leather would be nice..
How to Produce: Could be either plastics which will be injection molded or in fiberglass that can be molded. Alternatively a metal skeleton is build and the skin / textile will be zipped / sew over the metal structure. The metal skeleton can be coated with polyurethane or sponge. .
Possible Materials: The designer noted the following materials could be used in production: Plastic, Metal, Leather.
Dimensions and Packaging: The enclosing box for a single Frame Arm Chair is 608 mm x 630 mm x 608 mm, each box contains a single Frame Arm Chair and the bounding box dimensions for the package is 658 mm x 680 mm x 658 mm, roughly 144 pieces fit into 20' standard container and 288 pieces fit into the larger 40' standard container..
|
|
|
| Up: the prototype of Frame Arm Chair. 1/5 Scale. Realized with/in Rapid Prototyping / Stereolitography. |
|
Istikbal Arm Chair #441 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=441&type=Arm+Chair [View]
|
|
|
|
The Arm Chair: I wanted to design a chair that is organic and fun to have around, I am not satisfied what they sell as design today, simply I think design in todays economy has become "cheap" which is "easy to produce" as it is easy to produce it must be "simplistic".. I definitively want the retro style to come back. This is a large and comfortable chair by the way..
How to Produce: Outer shell and body can be produced by wood carving and lathing, fiberglass molding with lacquer finish, mass production can be done in policarbonate or other plastics. seating plane has sponge / polyurethane which is coated by textiles..
Possible Materials: The designer noted the following materials could be used in production: Plastic, Wood, Metal.
Dimensions and Packaging: The enclosing box for a single Istikbal Arm Chair is 827 mm x 926 mm x 806 mm, each box contains a single Istikbal Arm Chair and the bounding box dimensions for the package is 877 mm x 976 mm x 856 mm, roughly 54 pieces fit into 20' standard container and 108 pieces fit into the larger 40' standard container..
|
|
Haylo 2 Arm Chair #437 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=437&type=Arm+Chair [View]
|
|
|
|
The Arm Chair: This is a cosmetic (and a bit of structural) improvement over Haylo #332, I think it looks like as if inspired by American Collage Football team uniforms with a lot of stripes? actually not, I was just playing with colors..
How to Produce: Same as Haylo, but I want to add that a metal skeleton can be built to improve structure..
Possible Materials: The designer noted the following materials could be used in production: Fiberglass, Leather, Polyurethane Foam.
Dimensions and Packaging: The enclosing box for a single Haylo 2 Arm Chair is 818 mm x 573 mm x 781 mm, each box contains a single Haylo 2 Arm Chair and the bounding box dimensions for the package is 868 mm x 623 mm x 831 mm, roughly 84 pieces fit into 20' standard container and 171 pieces fit into the larger 40' standard container..
|
|
Metal Panty Arm Chair #402 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=402&type=Arm+Chair [View]
|
|
|
|
The Arm Chair: Well, actually I was working with elasticity, materials and so on so forth, I did not realize even myself how come it came to be this design, from orthogonal view it looks like alien eyes or a face and from the point of standard people, it really looks like panties..
How to Produce: The production is as follows; a well done mold (or molds depending on how much of this you want to weld together) is prepared; this mold is actually simple because we will weld the seating after the mainframe is prepared..
Possible Materials: The designer noted the following materials could be used in production: Metal.
Dimensions and Packaging: The enclosing box for a single Metal Panty Arm Chair is 673 mm x 624 mm x 448 mm, each box contains a single Metal Panty Arm Chair and the bounding box dimensions for the package is 723 mm x 674 mm x 498 mm, roughly 160 pieces fit into 20' standard container and 340 pieces fit into the larger 40' standard container..
|
|
Mazarin Arm Chair #385 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=385&type=Arm+Chair [View]
Product Family: Elmas |
|
|
|
The Arm Chair: Mazarin is a type of diamond cut, I wanted to make a family for the "Solid Cut" so I come up with armchair version of the couch. Although it appears very sharp, this is also a very comfortable design..
How to Produce: Again, for this I imagined to use Fiberglass as it is easy to work with, it should to be molded over a metal base (even wood is an option as skeleton structure or some other material), chromed finishing. Black leather cushion...
Possible Materials: The designer noted the following materials could be used in production: Fiberglass, Plastic, Metal.
Dimensions and Packaging: The enclosing box for a single Mazarin Arm Chair is 852 mm x 656 mm x 858 mm, each box contains a single Mazarin Arm Chair and the bounding box dimensions for the package is 902 mm x 706 mm x 908 mm, roughly 72 pieces fit into 20' standard container and 153 pieces fit into the larger 40' standard container..
|
|
Lapis Arm Chair #369 designed in 2009 by Onur Müştak Çobanlı
Permanent Link : http://www.omcdesign.com/?design=369&type=Arm+Chair [View]
|
|
|
|
The Arm Chair: An elegant chair to fill in the happy home spaces! You can lean backwards without fearing to fall, this chair is so comfortable that it redefines your feeling of comfort, you will never sit on another chair after this one!. I would also like to note that this is a re-interpretation of the Chinese Ming chair, we wanted to carry the traditional Chinese chair to the modern era and give it a new look and feeling..
How to Produce: Perhaps we can have it in metal coated with leather, the structure can be welded and then we can have a coat on it, this would be a simple solution, more industrial solutions such as injection molding of plastics can be thought, it is important to have an inset metal support for the legs in this case. Wood could be a very good alternative as well..
Possible Materials: The designer noted the following materials could be used in production: Metal, Leather, Wood.
Dimensions and Packaging: The enclosing box for a single Lapis Arm Chair is 700 mm x 900 mm x 675 mm, each box contains a single Lapis Arm Chair and the bounding box dimensions for the package is 750 mm x 950 mm x 725 mm, roughly 72 pieces fit into 20' standard container and 153 pieces fit into the larger 40' standard container..
|
|
|
| Up: the prototype of Lapis Arm Chair. 1/5 Scale. Realized with/in Rapid Prototyping / Stereolitography. |
|
Design by OMC² 
Furniture: 
