 Halk A Grill #282 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=282&type=Grill [View]
|
  |
|
|
The Grill: This is a non electrical grill (although an electrical version could also be designed) The use is to heat the metal plane at a heater and serve it to the table with the food..
How to Produce: Top is molded metal, bottom in molded ceramics..
Possible Materials: The designer noted the following materials could be used in production: Metal, Ceramic.
Dimensions and Packaging: The enclosing box for a single Halk A Grill is 400 mm x 72 mm x 400 mm, each box contains a single Halk A Grill and the bounding box dimensions for the package is 450 mm x 122 mm x 450 mm, roughly 1300 pieces fit into 20' standard container and 2700 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2009-07-03 05:02:03.
|
|
Finite Grill #281 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=281&type=Grill [View]
|
|
|
|
The Grill: Infinitely cooking possibilities! With this Finite number produced grill.. I am fed up with the x pattern on my food, this gives your food an infinite pattern!.
How to Produce: Ceramics molded and baked. Holding parts in wood, as I like to be able to use this object as a plate as well. Teflon grill..
Possible Materials: The designer noted the following materials could be used in production: Metal, Plastic.
Dimensions and Packaging: The enclosing box for a single Finite Grill is 302 mm x 83 mm x 499 mm, each box contains a single Finite Grill and the bounding box dimensions for the package is 352 mm x 133 mm x 549 mm, roughly 1386 pieces fit into 20' standard container and 2772 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2008-12-23 14:56:43.
|
|
Izgaara Grill #279 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=279&type=Grill [View]
|
|
|
|
The Grill: Inspired by the Japanese elegant designs that are simple, effective, thin and also take little space, this is a little grill that have side plates that you can use to hold newly cooked food..
How to Produce: The Grill is designed to be in ceramic for the base which is molded and metal for the top part, also some electronic component might be necessary..
Possible Materials: The designer noted the following materials could be used in production: Metal, Ceramic.
Dimensions and Packaging: The enclosing box for a single Izgaara Grill is 400 mm x 61 mm x 160 mm, each box contains a single Izgaara Grill and the bounding box dimensions for the package is 450 mm x 111 mm x 210 mm, roughly 3003 pieces fit into 20' standard container and 6534 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2008-12-23 14:52:08.
|
|
Kollapse Grill #278 designed in 2008
Permanent Link : http://www.omcdesign.com/?design=278&type=Grill [View]
|
|
|
|
The Grill: Not all the grills have to be the same and as if Kollapse is a living example, inspired with the shape of lips, the object stands out..
How to Produce: Ceramic base is casted, resistance is located just below the teflon grill, bottom part of the object has a wooden layer for additional heat isolation..
Possible Materials: The designer noted the following materials could be used in production: Metal, Plastic.
Dimensions and Packaging: The enclosing box for a single Kollapse Grill is 400 mm x 63 mm x 307 mm, each box contains a single Kollapse Grill and the bounding box dimensions for the package is 450 mm x 113 mm x 357 mm, roughly 1911 pieces fit into 20' standard container and 3969 pieces fit into the larger 40' standard container..
Upload Date & Time:: 2010-02-09 06:19:11.
|
|
Design by OMC² 
Furniture: 
